Category Archives: Food Technology

USDA Microbiology Laboratory Guidebook

USDA

The Guidebook contains current protocols for analytical tests required by FSIS regulatory activities on meat, poultry and egg products. Specifically, microbiological methods are presented for sample preparation, isolation and identification of the major foodborne pathogenic microorganisms and their toxins, meat tissue species identification, and the detection of extraneous materials and antimicrobial residues. Media and reagent formulations, and Most Probable Number Tables are contained in an appendix.

Electron-Beam Irradiation – Virus – Produce Control

Physorg.com

A recent study quantifying how electron-beam irradiation reduces the risk from foodborne viruses in lettuce and spinach was published in the February issue of Applied and Environmental Microbiology. Credit: National Center for Electron Beam Research, Texas A&M University.

The study quantified the theoretical health-risk reduction from virus-related foodborne illness through the use of electron-beam irradiation.

HPA Launches a New Website for UK Standards for Microbiology Investigations (SMI)

Dear User of UK Standards for Microbiology Investigations

 I am very pleased to tell you that the new website holding UK Standard for Microbiology Investigations is now available at http://www.hpa.org.uk/SMI.  The current website with which you are familiar at  http://www.hpa-standardmethods.org.uk/ will continue to be available until 23 March 2012 whilst we complete the transfer of the bacteriology SMIs.

 Changes to the design and information architecture of the SMI web pages aim to improve accessibility and allow the content to be speedily updated by staff in the Standards Unit. There is no requirement for a password and all the documents can be easily downloaded in PDF without restriction. It is anticipated that laboratories will convert the PDF format to word format when required.  An RSS feed for the web pages is in development.

 The SMIs on the new website continue to be listed by discipline and we hope the new format will make it easier for you to find the document of your choice along with comments from consultation. Once all the bacteriology documents are completed  we will decommission the old website and start to present the documents under syndromes, as well as by discipline. You will also note that the documents are presented in a newly designed template which distinguishes them as microbiology standards rather than laboratory SOPs and gives a more professional look to the publications.

 The new web pages on which the SMI documents are displayed are part of the HPA website.  An alternative route to the SMI webpages is as follows: 

·         www.hpa.org.uk <http://www.hpa.org.uk/>  > Products & Services <http://www.hpa.org.uk/ProductsServices/>  > Infectious Diseases <http://www.hpa.org.uk/ProductsServices/InfectiousDiseases/> > Quality Assurance <http://www.hpa.org.uk/ProductsServices/InfectiousDiseases/QualityAssurance/>  >UK Standards for Microbiology Investigations Home <http://www.hpa.org.uk/ProductsServices/InfectiousDiseases/QualityAssurance/UKStandardsForMicrobiologyInvestigations/> .

 SMIs are primarily intended as a general resource for practicing professionals in microbiology laboratory in the UK and assist with the laboratory diagnosis and treatment of infectious diseases. In addition, this new online resource aims also to provide support to clinical  microbiologists and commissioners of microbiology services.

I hope you find the new website a useful resource.

Valerie Bevan PhD MA MSc CSci FIBMS MIHM
Head of Department for Standards and Quality
Lead for Equality and Diversity for Microbiology Services
HPA Microbiology Services
Health Protection Agency
61 Colindale Avenue
London NW9 5EQ
Tel: 0208 327 6037

 

Food Poisoning: Understanding How Bacteria Come Back from the ‘Dead’

Science Daily

Salmonella remains a serious cause of food poisoning in the UK and throughout the EU, in part due to its ability to thrive and quickly adapt to the different environments in which it can grow. New research involving a team of IFR scientists, funded by BBSRC, has taken the first detailed look at what Salmonella does when it enters a new environment, which could provide clues to finding new ways of reducing transmission through the food chain and preventing human illness.

The full article discusses lag phase and what happens to the bacteria in that time.

Persistance and Survival of Pathogens in Dry Foods

ILSI Europe Report – 52 Page Full Report

Low-moisture foods and food ingredients, i.e., those appearing to be dry or that have been subjected to a drying process represent important nutritional constituents of human diets. Some of these foods are naturally low in moisture, such as cereals, honey and nuts, whereas others are produced from high-moisture foods that were deliberately submitted to drying (e.g., egg and milk powders). The addition of large amounts of salt or sugar can also be regarded as a ‘drying’ process by reducing the amount of water available for microbial growth.

Drying (removal of water) has been used since ancient times to preserve food. Although many pathogens and spoilage microorganisms can survive the drying process, this preservation technology is very effective because microbial growth will cease if water is no longer available for biological reactions. The water activity (aw) necessary to prevent growth of microorganisms, i.e., to inhibit physiological activities necessary for cell division, is 0.60 or less. If more water is available, some species of xerophilic spoilage moulds and osmophilic yeasts can grow at aw0.60 – 0.70; however, the minimum aw  for mycotoxin production by moulds is 0.80 with the majority not producing mycotoxins below a w 0.85 (Cousin et al., 2005). The minimum aw for growth of most bacteria is 0.87, although halophilic bacteria can grow at aw as low as 0.75. Among the pathogenic microorganisms, Staphylococcus aureus is particularly well-adapted to reduced moisture environments. Under optimal conditions it can grow at aw as low as 0.83 but in most foods the minimum is aw 0.85 (ICMSF, 1996). With this exception aside, in the context of this monograph, all foods and food ingredients that have an aw that prevents the growth of bacterial foodborne pathogens, i.e., with an aw of 0.85 or lower, are considered. These foods and ingredients are referred to as having low moisture or low aw. A wide range of products falls in this category: animal feeds such as fishmeal and pet foods, cereals, chocolate, cocoa powder, dried fruits and vegetables, egg powder, fermented dry sausage, flour, meal and grits, herbs, spices and condiments, honey, hydrolysed vegetable protein powder, meat powders, dried meat, milk powder, pasta, peanut butter, peanuts and tree nuts, powdered infant formula, rice and other grains, and seeds (e.g., sesame, melon, pumpkin, linseed). Although low moisture foods have some clear advantages with respect to food safety, there are nevertheless some major concerns:

• Many microorganisms, including pathogens, are able to survive drying processes. Once in a dried state, metabolism is greatly reduced, i.e., there is no growth but vegetative cells and spores may remain viable for several months or even years. They can often persist longer in low moisture foods and in dry food processing environments than in high-moisture foods and wet environments.

• It is often difficult or even impossible to eliminate pathogens from foods with low moisture by processes such as application of mild heat treatment (e.g., pasteurisation) or high hydrostatic pressure that work very well for high-moisture foods.

• Food processing environments, in which dried foods are handled, must be maintained at low humidity and kept dry, and this can give rise to problems in cleaning and sanitising, which are usually ‘wet’ procedures.

• Finally, it is of concern that consumers sometimes wrongly believe that low-moisture foods are sterile, which may lead to dangerous practices such as keeping reconstituted infant formula at ambient temperature for prolonged periods, thereby creating growth opportunities for pathogens such as Bacillus cereus and Cronobacter species.

High Pressure Processing and Pathogens

Food Safety News HPP

This is some copy from the article in Food Safety News which is quite extensive and has links to videos of HPP in practice.

“Pascalisation,” commonly known in the food industry as HPP, or high pressure processing. Has only been used on the commercial level for the past 2 decades or so, the technology has been around far longer than that.

This process doesn’t rely on heat, such as pasteurisation; or chemicals, such as preservatives; or irradiation to kill the harmful bacteria on food. And while heat and cooking are good ways to kill bacteria, they can also impair the flavor, texture, color and nutrition of the food. For the most part, the same is true of irradiation.
 
Under high pressure processing, already packaged products such as fresh hamburger and turkey; processed fruit such as apple sauce; oysters; fish; guacamole; and ready-to-eat meats such as sliced turkey, pastrami and beef are put inside a pressure chamber. Water is then added to the chamber before it is sealed. From there, the pressure is increased to the maximum desirable level and sustained for a set period of time. The chamber is then decompressed and drained and the packaged products are removed.