Research Clostridium – Fill Temperatures – Cooling Models for Cooked Meats

Ingenta Connect – Effect of Fill Temperature on Clostridium botulinum Type A Toxin Activity during the Hot Filling of Juice Bottles

The potential threat of terrorist attacks against the United States food supply using neurotoxin produced by Clostridium botulinum (BoNT) has resulted in the need for studying the effect of various food process operations on the bioavailability of this toxin. The objective of this study was to evaluate C. botulinum type A neurotoxin bioavailability after a simulated hot fill juice bottling operation. C. botulinum type A acid mud toxin (∼10⁶ mouse lethal dose [MLD₅₀]/ml) was deposited into juice bottles at an experimentally determined fastest cooling spot. Bottles (12 or 20 oz [355 and 592 ml]) were filled with either apple juice or an orange drink, at 80 or 85°C, in either upright or inverted orientations. Toxicity of the juice was evaluated as a function of holding time (1 to 2 min) by the mouse bioassay. The fastest cooling point in the upright orientation was determined to be at a bottle’s bottom rim. In the inverted orientation, the fastest cooling point was in the bottle cap region. With respect to these two points, the upright bottle cooled faster than the inverted bottle, which was reflected in a higher inactivation of BoNT in the latter. For the orange drink (pH 2.9) toxicity was reduced by 0.5 × 10⁶ MLD₅₀/ml to a nondetectable level after 1 min in all bottle sizes, orientations, and temperatures as measured by the mouse bioassay. This indicates that there was at least a 0.5 × 10⁶ MLD₅₀/ml reduction in activity. Inactivation in apple juice (pH 4.0), to the same degree as in the orange drink, was found only for the inverted orientation at 85°C. Complete inactivation in apple juice for all conditions was found at a lower added toxin level of 0.25 × 10⁵ MLD₅₀/ml. In general, bottle inversion and filling at 85°C provided complete inactivation of BoNT to the 0.5 × 10⁶ MLD₅₀/ml level. All experiments resulted in the inactivation of 2.5 × 10⁴ MLD₅₀/ml of BoNT regardless of juice type, fill temperature, or bottle orientation and size.

PubMedGov – Assessing the Performance of Clostridium perfringens Cooling Models for Cooked, Uncured Meat and Poultry Products.

Heat-resistant spores of Clostridium perfringens may germinate and multiply in cooked meat and poultry products when the rate and extent of cooling does not occur in a timely manner. Therefore, six cooling models (PMP 7.0 broth model; PMIP uncured beef, chicken, and pork models; Smith-Schaffner version 3; and UK IFR ComBase Perfringens Predictor) were evaluated for relative performance in predicting growth of C. perfringens under dynamic temperature conditions encountered during cooling of cooked, uncured meat and poultry products. The predicted growth responses from the models were extensively compared with those observed in food. Data from 188 time-temperature cooling profiles (176 for single-rate exponential cooling and 12 for dual-rate exponential cooling) were collected from 17 independent sources (16 peer-reviewed publications and one report) for model evaluation. Data were obtained for a variety of cooked products, including meat and poultry slurries, ground meat and poultry products with and without added ingredients (e.g., potato starch, sodium triphosphate, and potassium tetrapyrophosphate), and processed products such as ham and roast beef. Performance of the models was evaluated using three sets of criteria, and accuracy was defined within a 1- to 2-log range. The percentages of accurate, fail-safe, or fail-dangerous predictions for each cooling model differed depending on which criterion was used to evaluate the data set. Nevertheless, the combined percentages of accurate and fail-safe predictions based on the three performance criteria were 34.66 to 42.61% for the PMP 7.0 beef broth model, 100% for the PMIP cooling models for uncured beef, uncured pork and uncured chicken, 80.11 to 93.18% for the Smith-Schaffner cooling model, and 74.43 to 85.23% for the UK IFR ComBase Perfringens Predictor model during single-rate exponential chilling. Except for the PMP 7.0 broth model, the other five cooling models (PMIP, Smith-Schaffner, and UK IFR ComBase) are useful and reliable tools that food processors and regulatory agencies can use to evaluate the safety of cooked or heat-treated uncured meat and poultry products exposed to cooling deviations or to develop customized cooling schedules